PhD (Mechanical Engg.), M. Tech. (Production Engg.), B.Sc. Engg. (Mechanical Engg.) 30 years of experience-12.5 years industrial and 17.5 years of teaching & research.
Publication
International Journal (SCIE/SCOPUS Indexed)
- Optimizing Single Point Diamond Turning for Mono-Crystalline Germanium Using Grey Relational Analysis (Materials and Manufacturing Processes-Taylor & Francis), Vol. 30, pp. 1018–1025, 2015. (Thomson & Reuter indexed), Impact Factor=3.5)
- Optimization of Process Parameters to achieve Nano Level Surface Quality on Poly methyl Methacrylate (Materials and Manufacturing Processes-Taylor & Francis), Vol. 31, pp. 1917–1926, 2016. (Thomson & Reuter indexed), Impact Factor=3.5)
- Surface Characterization in Precision Single Point Diamond Turning of Zirconium Chromium Copper Alloy. (International Journal of Manufacturing and Machinability of Materials-Inder Science), Vol. 19, No.2, pp. 95-109, 2017. (Scopus Indexed, Cite score 3.0)
- Implementation of Safety Techniques in the Manufacturing Industry. (International Journal of Innovative Technology and Exploring Engineering), Vol. 9, Issue 4, 2020. (Scopus Indexed)
- Selection of Optimal Parameters for Reduction of Forging Defect using AHP-TOPSIS Technique. (International Journal on Emerging Technologies), Vol. 11, Issue 2, pp. 178-186, 2020. (Scopus Indexed)
- A Review on exergy analysis of nanofluid flow through several conduits. (Frontiers in Heat and Mass Transfer), Vol. 14, Issue 30, pp. 1-15, 2020. (Scopus Indexed)
- Diamond turning of optical materials: A review. (International Journal of Manufacturing and Machinability of Materials-Inder Science), Accepted September. 2020. (Scopus Indexed, Cite score 3.0).
- Value Stream Mapping-Panacea for lead time reduction in Ferrite Core Industry. (Accepted January 2021 in Materials Today Proceedings)
- Structural analysis and optimization of machine structure for the measurement of cutting
- force for wood. (Communicated 2020)
International Journal
- Application of Dimensional Analysis for Selection of Variables used in Abrasive Jet Machining (International Journal of Exploration in Engineering and Technology- IJEET) ISSN 2394-7918, Vol. 2, Issue 1, pp. 49-51, February 2016.
- Design and Analysis of Stairs Climbing Robotic Wheel Chair (International Journal of Exploration in Engineering and Technology- IJEET) ISSN 2394-7918, Vol. 2, Issue 2, pp. 50-54, August 2016.
- Analysis of Solar Collector using Second Law of Thermodynamics (International Journal of Exploration in Engineering and Technology- IJEET) ISSN 2394-7918, Vol. 3, Issue 1, pp. 49-51, May 2017.
- Review on Solar Air Heaters using Dimples and Protrusions in an Air Flow Passage (International Journal of Exploration in Engineering and Technology- IJEET) ISSN 2394-7918, Vol. 3, Issue 1, pp. 63-67, May 2017.
Book
“Machining Productivity Improvement” (ISBN 978-3-659-38961-0) by Lap Lambert
Academic Publishing, Germany.
International Conference
- Presented a paper on “Design Optimization of Final Drive Transmission System using Solidworks” in International Conference on Research Innovations in Engineering and Technology (ICRIET-2016) at Maharaja Agrasen University, Baddi (HP) on 8th & 9th April, 2016.
- Presented a paper on “Effect of Cutting Parameters on Surface Roughness in Cylindrical Grinding” in International Conference on Research Innovations in Engineering and Technology (ICRIET-2016) at Maharaja Agrasen University, Baddi (HP) on 8th & 9th April, 2016.
National Conference
- Presented a paper on “Surface Wear Investigation using Microwave Heating and TIG Welding” in National Conference on Recent Advances in Engineering and Technology (NCRAET-2017) held at Maharaja Agrasen University, Baddi (HP) on 8th April, 2017.
- Presented a paper on “Computational Study on Heat Transfer Enhancement in Heat Exchanger Tube using Baffle” in National Conference on Recent Advances in Engineering and Technology (NCRAET-2017) held at Maharaja Agrasen University, Baddi (HP) on 8th April, 2017.
- Presented a paper on “Process Parameter Optimization of Wire Cut EDM for Micro Channel Machining using Taguchi’s Approach” in National Conference on Recent Advances in Engineering and Technology (NCRAET-2017) held at Maharaja Agrasen University, Baddi (HP) on 8th April, 2017.
- Presented a paper on “A Study on Surface Roughness in Magneto Rheological Finishing using Regression Analysis Method” in National Conference on Innovations in Civil and Mechanical Engineering held at Baddi University, Baddi (HP) on 12th May, 2016.
- Presented a paper on “Effect of Silt Erosion & Cavitation on Hydraulic Turbines” in National Conference on “Recent Advances in Renewable Energy & Environment Sciences (NCRAREES-2013)” at Shoolini University, Solan (H.P.) on 8th & 9th June, 2013.
- Presented a paper on “A Review on Small Hydro Power” in National Conference on “Recent Advances in Renewable Energy & Environment Sciences (NCRAREES-2013)” at Shoolini University, Solan (H.P.) 8th & 9th June, 2013.
- Presented a paper on “Advanced Cutting Tool Materials” in National Conference on “Global Trends in Mechanical Engineering (GTME-2010)” at Rayat and Bahra Institute of Engineering & Bio-technology, Mohali, Punjab on 16th & 17th April, 2010.
- Presented a paper on “Manufacturing of Micro-Electro-Mechanical-Systems” in National conference on “Global Trends in Mechanical Engineering (GTME-2010)” at Rayat and Bahra Institute of Engineering & Bio-technology, Mohali, Punjab on 16th & 17th April, 2010.
- Presented a paper on “Environmental Ergonomics and Work Design” in National Conference on “Technology and Environment (NCTE-2008)” at Institute of Engineering & Emerging Technologies, Baddi (H.P.) on 22nd & 23rd February, 2008.
- Presented a paper on “Lubricants and Pollution” in National Conference on “Technology and Environment (NCTE-2008)” at Institute of Engineering & Emerging Technologies, Baddi (H.P.) on 22nd & 23rd February, 2008.
- Presented a paper on “Daily Life Pollution” in National Conference on “Technology and Environment (NCTE-2008)” at Institute of Engineering & Emerging Technologies, Baddi (H.P.) on 22nd & 23rd February, 2008.
M. Tech. Thesis
- opology optimization of wood cutter machine for the measurement of the cutting force (Completed)
- Forging defect analysis and their reduction using AHP-TOPSIS method (Completed)
- Overall Equipment Effectiveness in a Manufacturing Plant: A Case Study (Under process)
PATENTS
S.No |
Title |
1 |
Productivity Improvement by modification in fixture. |
2 |
Fixture with multi loading of components. |
3 |
Solar tracking system. |
4 |
Cooking stove (Smokeless). |
5 |
Surface grinding of multi-connecting rods on horizontal surface grinding machine. |
6 |
Hidden hydraulic runway |
7 |
A method for enhancement in transmission of light by dry machining of pmma discs |
8 |
A method for achieving mirror finish on mono- crystalline germanium disc |
9. |
A method of surface characterisation of copper alloy disc and uses thereof |
10. |
A method of surface integrity of aluminium alloy-6061 disc and uses thereof |
11. |
Ideal machining of pmma and polycarbonate optical lens and spectacle glasses and methods thereof |